References
[1]. Composite Fouling of Heat Transfer Equipment in Aqueous Media - A Review, Heat Transfer Engineering, 21:3, 34-42, DOI: 10.1080/014576300270889, Inorganic Fouling, Paragraph 3, line 1, http://dx.doi.org/10.1080/014576300270889
[2]. Sudmalis, M., and Sheikholeslami, R., Coprecipitation of CaCO3 and CaSO4, Canadian Journal of Chemical Engineering, vol. 78, no. 1, pp. 21–31, 2000//Kazi, S. N., Duffy, G. G., and Chen, X. D., Mineral Scale Formation and Mitigation on Metals and A Polymeric Heat Exchanger Surface, Applied Thermal Engineering, vol. 30, no. 14–15, pp. 2236–2242, 2010
[3]. Zhao, X., & Chen, X. D. (2013) A Critical Review of Basic Crystallography to Salt Crystallization Fouling in Heat Exchangers, Heat Transfer Engineering, 34(8-9), 719–732. doi:10.1080/01457632.2012.739482,FOULING MITIGATION STRATEGY, Physical method, Physical Water Treatment
Cite this article
Niu,S.;Tang,S.;Wang,L.;Zhou,J.;Zheng,N. (2023). Review: Bio-inspired surfaces for fouling resistance. Applied and Computational Engineering,7,562-571.
Data availability
The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.
Disclaimer/Publisher's Note
The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of EWA Publishing and/or the editor(s). EWA Publishing and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
About volume
Volume title: Proceedings of the 3rd International Conference on Materials Chemistry and Environmental Engineering (CONF-MCEE 2023), Part II
© 2024 by the author(s). Licensee EWA Publishing, Oxford, UK. This article is an open access article distributed under the terms and
conditions of the Creative Commons Attribution (CC BY) license. Authors who
publish this series agree to the following terms:
1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons
Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this
series.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published
version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial
publication in this series.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and
during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See
Open access policy for details).
References
[1]. Composite Fouling of Heat Transfer Equipment in Aqueous Media - A Review, Heat Transfer Engineering, 21:3, 34-42, DOI: 10.1080/014576300270889, Inorganic Fouling, Paragraph 3, line 1, http://dx.doi.org/10.1080/014576300270889
[2]. Sudmalis, M., and Sheikholeslami, R., Coprecipitation of CaCO3 and CaSO4, Canadian Journal of Chemical Engineering, vol. 78, no. 1, pp. 21–31, 2000//Kazi, S. N., Duffy, G. G., and Chen, X. D., Mineral Scale Formation and Mitigation on Metals and A Polymeric Heat Exchanger Surface, Applied Thermal Engineering, vol. 30, no. 14–15, pp. 2236–2242, 2010
[3]. Zhao, X., & Chen, X. D. (2013) A Critical Review of Basic Crystallography to Salt Crystallization Fouling in Heat Exchangers, Heat Transfer Engineering, 34(8-9), 719–732. doi:10.1080/01457632.2012.739482,FOULING MITIGATION STRATEGY, Physical method, Physical Water Treatment