Study on the application of construction project cost control in China

Research Article
Open access

Study on the application of construction project cost control in China

Bangguo Wang 1*
  • 1 University of Sydney    
  • *corresponding author bwan6229@uni.sydney.edu.au
Published on 7 November 2023 | https://doi.org/10.54254/2755-2721/24/20230688
ACE Vol.24
ISSN (Print): 2755-273X
ISSN (Online): 2755-2721
ISBN (Print): 978-1-83558-069-1
ISBN (Online): 978-1-83558-070-7

Abstract

Project cost control is a hot issue in construction enterprise management and a key factor to determine the return on project investment. With the continuous summary of modern project management experience, systematic, comprehensive and dynamic management methods and ideas gradually began to be adopted. As a controllable system, cost system is the key to determine the market competitiveness of construction enterprises. This paper combines qualitative research with quantitative research, normative research with empirical research, theoretical research with practical research, and makes comprehensive use of previous research results to provide guidance for the practical operation of cost control in construction enterprises. Firstly, it introduces the important factors affecting the cost and the background and purpose of the project cost control, and then analyzes the object and content of the project cost control and analysis. Finally, the phenomenon of "three super" and the deviation of the project cost are analyzedd and discussed. It is of great practical significance to study project cost control for promoting the reform of investment system and improving market competitiveness of construction enterprises.

Keywords:

project cost control, construction cost, "three super" phenomenon

Wang,B. (2023). Study on the application of construction project cost control in China. Applied and Computational Engineering,24,105-112.
Export citation

References

[1]. BIM Appliction Standard 2007 Based on IFC Standard published by the US National Institute of Building Sciences.

[2]. Li J 2009 Research on Key Technologies of Concrete Structure 100 Year Durabiliity of the National Stadium for Beijing 2008 Olympic Games Proc.of Shanghai Int. Conf. on Technology of Architecture and Stucture p 68.

[3]. Ma Z,Li H and Yang J 2014 Using XML to support information exchange in construction projects Autom. Constr. 12 pp 491-506.

[4]. Linderoth H 2010 Understanding Adoption and Use of BIM As the Creation of Actor Net works Autom. Constr. pp 66-72.

[5]. Eastman C, Teicholz P and Sacks R et al. 2000 BIM handbook New Jersey ohnWiley &Sons.

[6]. Zhang J and Hu Z 2011 BIM-and-4D-based integrated solution of analysis and management for conflicts and structural safety problems during construction:principles and methodologies Autom. Constr. pp 155-166.

[7]. Li Y, Lang H and Wu T 2013 Project Quality Management Based on Building Information Modeling Construction technology Technology 10(1) p 20-23.

[8]. YA and K 2011 Technology adoption in the BIM implementation for lean architectural practice Autom. Constr. pp 189-195.

[9]. Smith D and Tardiff M 2009 Building Information Modelling: a Strategic Implementation Guide for Architects, Engineers Constructors and Real Estate Asset Managers 25(1) p 99.

[10]. Ding L and Ying Z 2014 Burcu Akinci.Building Information Modeling application framework The process of expanding from 3D to computable Autom. Constr. 24(2) pp 82-93.

[11]. Ma Z,Wei Z and Wu S 2011 Application and extension of the IFC standard in construction cost estimating for tendering in China Autom. Constr. 24(3) pp 96-204.

Cite this article

Wang,B. (2023). Study on the application of construction project cost control in China. Applied and Computational Engineering,24,105-112.

Data availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

Disclaimer/Publisher's Note

The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of EWA Publishing and/or the editor(s). EWA Publishing and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

About volume

Volume title: Proceedings of the 2023 International Conference on Functional Materials and Civil Engineering

ISBN：978-1-83558-069-1(Print) / 978-1-83558-070-7(Online)
Editor：Bhupesh Kumar
Conference website: https://www.conffmce.org/
Conference date: 26 August 2023
Series: Applied and Computational Engineering
Volume number: Vol.24
ISSN：2755-2721(Print) / 2755-273X(Online)

© 2024 by the author(s). Licensee EWA Publishing, Oxford, UK. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license. Authors who publish this series agree to the following terms:
1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this series.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this series.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See Open access policy for details).

References

[1]. BIM Appliction Standard 2007 Based on IFC Standard published by the US National Institute of Building Sciences.

[2]. Li J 2009 Research on Key Technologies of Concrete Structure 100 Year Durabiliity of the National Stadium for Beijing 2008 Olympic Games Proc.of Shanghai Int. Conf. on Technology of Architecture and Stucture p 68.

[3]. Ma Z,Li H and Yang J 2014 Using XML to support information exchange in construction projects Autom. Constr. 12 pp 491-506.

[4]. Linderoth H 2010 Understanding Adoption and Use of BIM As the Creation of Actor Net works Autom. Constr. pp 66-72.

[5]. Eastman C, Teicholz P and Sacks R et al. 2000 BIM handbook New Jersey ohnWiley &Sons.

[6]. Zhang J and Hu Z 2011 BIM-and-4D-based integrated solution of analysis and management for conflicts and structural safety problems during construction:principles and methodologies Autom. Constr. pp 155-166.

[7]. Li Y, Lang H and Wu T 2013 Project Quality Management Based on Building Information Modeling Construction technology Technology 10(1) p 20-23.

[8]. YA and K 2011 Technology adoption in the BIM implementation for lean architectural practice Autom. Constr. pp 189-195.

[9]. Smith D and Tardiff M 2009 Building Information Modelling: a Strategic Implementation Guide for Architects, Engineers Constructors and Real Estate Asset Managers 25(1) p 99.

[10]. Ding L and Ying Z 2014 Burcu Akinci.Building Information Modeling application framework The process of expanding from 3D to computable Autom. Constr. 24(2) pp 82-93.

[11]. Ma Z,Wei Z and Wu S 2011 Application and extension of the IFC standard in construction cost estimating for tendering in China Autom. Constr. 24(3) pp 96-204.

For authors
Guide for authors Policies for authors Aims and scope Subscription Open access policy
For editors
Policies for editors Editorial board
For reviewers
Policies for reviewers Privacy policy

Cookies are used by this site.
Copyright © 2024 EWA Publishing, its licensors, and contributors. All rights reserved, including text and data mining, AI training, and similar technologies.