
Smart transit car design based on STM32 and OPENMV
- 1 Nanjing Tech University
* Author to whom correspondence should be addressed.
Abstract
Under the background of the times, Smart Operating Vehicle has wide application prospects. This paper designs a Smart Car based on STM32F103RCT6 MCU, which combines the functions of OPENMV digital recognition module and infrared route tracing, in order to realize the function of the car to reach the designated location and start its operation. The scheme in this paper breaks the limitation of conventional manual work and can replace manual work in extreme environments such as high temperature and small space, which fully reflects the era significance of smart hardware.
Keywords
STM32F103RCT6, OPENMV, smart car, automatic tracking
[1]. Liping Xuan, Yanli Li, Based on STM32F103RCT6 two-wheel self-balancing trolley design [J] Journal of Heilongjiang University of Engineering, 2018, 32 (4): 6-10. DOI:10.19352/j.cnki.issn1671-4679.2018.04.002.
[2]. Peng Zhao, Mei Qian, Shuaibo Li, Design of speed and position control system of single chip PID motor [J] Industrial Instrumentation and Automation, 2022 (4): 24-27, 44. DOI:10.19950/j.cnki.cn61-1121/th.2022.04.005.
[3]. Mengzhen Chen, Ying Chen, Research and application of infrared tracking detection technology for intelligent car [J] Information Systems Engineering, 2017 (10): 93-94. DOI:10.3969/j.issn.1001-2362.2017.10.064.
[4]. Zhongkun Shen, Jinjie Xu, Intelligent pathfinding vehicle based on OpenMV vision module and MPU6050 angle sensor [J] Electronic production, 2022, 30 (3): 28-30, 19. DOI:10.3969/j.issn.1006-5059.2022.03.007.
[5]. Zhenbao Huang, Chen Yang A fast implementation method of NCC algorithm in image matching [J] Informatization Research, 2011, 37 (2): 48-52. DOI:10.3969/j.issn.1674-4888.2011.02.012.
[6]. Laoda Tu, Review the essence of Java [Z] Blog, https://blog.csdn.net/hebtu666/article/details/114779474 2021.03.015.
[7]. Xiaochen Liu, Jiaqi Wang, Design of intelligent drug delivery cart based on OPENMV [J] RTVU Technology, 2022 (1): 1-7. DOI: 10.19469/j.cnki.1003-3297.2022.01.0001.
[8]. Xiaolong Chen, Design and implementation of obstacle avoidance and optimization system for intelligent vehicle based on gray sensor [J] China Informatization, 2018 (2): 66-67. DOI: 10.3969/j.issn.1672-5158.2018.02.029.
[9]. Qiang Gao, Zhenbing Zhao, Ran Li, et al. Research and application of near-infrared image denoising method based on independent component analysis [J] Chinese Journal of Electrical Engineering, 2005, 25 (22): 94-98. DOI:10.3321/j.issn:0258-8013.2005.22.017.
Cite this article
Xu,C. (2023). Smart transit car design based on STM32 and OPENMV. Theoretical and Natural Science,5,953-959.
Data availability
The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.
Disclaimer/Publisher's Note
The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of EWA Publishing and/or the editor(s). EWA Publishing and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
About volume
Volume title: Proceedings of the 2nd International Conference on Computing Innovation and Applied Physics (CONF-CIAP 2023)
© 2024 by the author(s). Licensee EWA Publishing, Oxford, UK. This article is an open access article distributed under the terms and
conditions of the Creative Commons Attribution (CC BY) license. Authors who
publish this series agree to the following terms:
1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons
Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this
series.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published
version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial
publication in this series.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and
during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See
Open access policy for details).